Logitech® Z-560 controller in 5 1/4 bay...

[Droid]

I would like to put the controller in my case like a drive/baybus etc... here's a pic of what it looks like in case you don't already know...

http://www.designbydroid.com/mygear/logitechz560-2.jpg

Dimentions are 6 3/4w x 1 3/4h x 4d
Does anyone have any suggestions as to how I can do this?

Thanx!

[[GF]Burke]

I would take everything out of that black case.. and try to get it down to 5.25 wide size. OR, take it all apart , cut a 5.25 bay for all the buttons.. make the wires longer that attach the buttons to the main caseing.. and put the main case somewere in the PC case...

so basically you will be making your own front panel out of a 5.25 bay door.. and putting the rest on that box inside the PC..

[Droid]

Burke"]I would take everything out of that black case.. and try to get it down to 5.25 wide size.  OR, take it all apart , cut a 5.25 bay for all the buttons.. make the wires longer that attach the buttons to the main caseing.. and put the main case somewere in the PC case...

so basically you will be making your own front panel out of a 5.25 bay door.. and putting the rest on that box inside the PC..

Thanx Burke,

But maybe I made you think I wanted to put it in a hd bay...sorry. I meant in one of the CD bays...they measure 5.75 & with the controller being 6.75 that's only an inch diff. The front of the controller is bowed (rounded) outwards, so the front cound stick out of a cut-out...no?

What i really need is how to mount it in the bay since it's not like a CDROM how would I secure it?

Sorry for the confusion :oops:

[[GF]Burke]

O no, thats what i ment.. in the 5.75 bay door.

your going to have to take off that Logitec caseing.. either way you go.

I e-maild you a pic.

[Droid]

Burke"]O no, thats what i ment.. in the 5.75 bay door.  

your going to have to take off that Logitec caseing.. either way you go.

I e-maild you a pic.

I didn't get the e-mail... did you sent it to droid@designbydroid.com ?

Thanx for the help!

[[GF]Burke]

droidandroid@hotmail.com

[Droid]

Thanx Burke!

Sorry I didn't reply earlier...been busy skinnin'. When I do the mod I'll post it here with a help credit to you.

Be well!