synergy_711
06-25-2004, 04:27 PM
here it is, the glue still drying but here are the pics of some of what ive done (brought to you by MoBo)
------SRY GUYS, sites busted-----------
here is the soon to be hole for the floppy(pic 1)
i used some dremel heay duty cut off disks to saw thru everthing (part #420)(pic 2)
here is the floppy mounted in an old drive bay (duct tape is just to hold it while the epoxy dries)(pic 3)
i used quik tite 2 part epoxy(pic 4)
i mounted the mobo to a lexan tray and epoxied in the standoffs(pic 5)
i used a dull cutting bit in my dremel to cut out the switch (pic 6/7)
the floopy all installed (pic 8)
the barbed wire(pic 9)
the optical drives (pic 10)
the full monty(pic 11)
http://www.geocities.com/charger_711/Picture001.jpg
http://www.geocities.com/charger_711/Picture006.jpg
http://www.geocities.com/charger_711/Picture004.jpg
http://www.geocities.com/charger_711/Picture005.jpg
------SRY GUYS, sites busted-----------
here is the soon to be hole for the floppy(pic 1)
i used some dremel heay duty cut off disks to saw thru everthing (part #420)(pic 2)
here is the floppy mounted in an old drive bay (duct tape is just to hold it while the epoxy dries)(pic 3)
i used quik tite 2 part epoxy(pic 4)
i mounted the mobo to a lexan tray and epoxied in the standoffs(pic 5)
i used a dull cutting bit in my dremel to cut out the switch (pic 6/7)
the floopy all installed (pic 8)
the barbed wire(pic 9)
the optical drives (pic 10)
the full monty(pic 11)
http://www.geocities.com/charger_711/Picture001.jpg
http://www.geocities.com/charger_711/Picture006.jpg
http://www.geocities.com/charger_711/Picture004.jpg
http://www.geocities.com/charger_711/Picture005.jpg